Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the wordpress-seo domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/html/wp-includes/functions.php on line 6260 Conditioning Mousse Whip - Happi

Conditioning Mousse Whip

Conditioning Mousse Whip
Ingredients
%

Phase A

  • Deionized water
  • 57.80
  • Structure XL (AkzoNobel) (Hydroxypropyl starch phosphate)
  • 2.00
  • Biostyle XH polymer (25% active) (AkzoNobel) (Maltodextrin/VP Copolymer)
  • 8.00

Phase B

  • Lanette O (BASF) (Cetearyl alcohol)
  • 2.50
  • Dow Corning 200 Fluid (100cst) (Dow Corning) (Dimethicone)
  • 0.25
  • BRIJ CS20-SO-(MH) (Croda) (Ceteareth-20)
  • 0.50
  • Arquad PC SV-60 PG surfactant (60% active) (AkzoNobel) (Soytrimonium chloride (and) propylene glycol)
  • 1.50

Phase C

  • Deionized water
  • 20.00
  • Dissolvine NA2-S chelate (AkzoNobel) (Disodium EDTA)
  • 0.20
  • Euxyl PE 9010 (Schülke & Mayr) (Phenoxyethanol (and) ethylhexylglycerin)
  • 0.75

Phase D

  • Armocare VGH-70 surfactant (75% active) (AkzoNobel)(Dipalmitoylethyl dimonium chloride)
  • 0.50

Phase E

  • Demeon D (AkzoNobel) (Dimethyl ether)
  • 3.00
  • A-46 (Isobutane (and) propane)
  • 3.00

Procedure

To prepare phase A, charge the water into the main mixing vessel and begin mixing with an overhead mixer and propeller blade at 500 rpm. Slowly sift the Structure XL rheology modifier into the vortex. When completely in solution, add the Biostyle XH polymer. Begin heating to 80°C. For phase B add all of the ingredients into a second mixing vessel and heat to 80°C. When both phase A and B reach 80°C, add phase B to phase A and continue mixing at 500 rpm for an additional 5 minutes. For phase C, mix the cooling water, Dissolvine NA-2 chelate, and preservative in a third vessel until homogeneous. Turn off the heat then add phase C to the main mixing vessel to begin cooling. Add phase D once batch reaches 70-75°C. Continue mixing and cooling. Allow batch to sit for 24 hours and measure pH. For phase E, fill containers and crimp, then charge cans with propellant.

Properties

pH—4.00 – 4.50 @ 25°C; Appearance—Milky, White emulsion; Viscosity—1800 – 2200 cps Brookfield Helipath TC-spindle @ 10rpm.

More Information

AkzoNobel Surface Chemistry 800 906-9977 • Fax: 908-707-3664, Email: personalcare.usa@akzonobel.com Website: www.akzonobel.com/PersonalCare